Do your Quest 3 Controllers slide around in your Syntech Hard Case?

I purchased the Syntech Hard Case (medium) for my Meta Quest 3 and generally I'm really happy with it. It fits the headset even with the Aubika Battery Strap attached.

The only thing that bothered me was the section in the middle for the controllers. Since this was originally designed for the Oculus Quest 2, the smaller Q3 controllers just float around in there.

My original solution was a folded up piece of foam packing sheet placed on top of the controllers to wedge them in. However I decided a 3D printed solution might work better.

So here is my design. This is my first attempt at 3D printing and it had a few revisions to get right.

Plans for future revisions:

  • Flexible clips that hold the 'heads' in place
  • Slight adjustment of controller positioning to avoid holes

So far it works well, especially with the adhesive Velcro strips I added to the bottom to stop it sliding around.

Download .STL and .3MF files for Printing

Download the 3D Printable Files here

Click here to download the ZIP file (1.31mb)